EPDM Roof Kits - Flat Roof Extension
EPDM Roof Kit for Flat Roof Extensions
This Flat Roof Extension Kit is for all sizes of flat roof extensions. Comes with PVC Gutter trim at the front, PVC Kerb trim for the two sides, and an Upstand Wall edge where the flat roof extension meets the house, which includes primer, flashing tape and metal trim.
Kit sizes are shown as Depth × Width
What is included in the kit
- EPDM Rubber Membrane (to match your roof size plus 150mm overhang on all sides)
- Water Based Deck Adhesive for bonding EPDM Rubber to a wood based roof
- Contact Adhesive for the roof edges and for your Upstand Wall edge
- PVC Kerb Trims on 2 sides (available in Black, Anthracite and White)
- Gutter / Drip Trim on 1 side (available in Black, Anthracite and White)
- 2x Kerb Corners
- Metal Trims for your Upstand Wall edge (including EPDM primer and flashing tape)
- Selsil Adhesive Sealant 300ml - one tube supplied per length of metal trim
- All jointers, clips and nails for your trims
The EPDM rubber you receive will be enough to accommodate the exact size you have requested plus a 150mm overhang on all sides, which is highly recommended for proper installation. For example, if your roof is 3m x 2m then you need 3.3m x 2.3m.
We sell our EPDM on roll widths of 3.05m, 3.55m, 4.05m, 4.58m, 5.08m, 6.10m, 7.62m, 9.15m and 12.2m, so your membrane is cut from the nearest roll width to minimise wastage.
We will email you a link that reopens this kit at today’s prices. The link works for a limited time.
Not sure which kit you need? Try the EPDM roof calculator, or browse everything in the shop.
